Pages

Thursday, July 28, 2011

Making whole insect slide – an easy way

In the previous post, I presented a modified method of microscope slide making originally described by Schauff.  The method involved four steps: maceration, cleaning, dehydration and mounting.  The process removes the non-transparent internal organs and preserves the chitin exoskeleton.  It allows the clear viewing the minute details of insects at high magnification using a compound microscope.  It does has draw backs, including the use of caustic reagents and the potential of damaging the specimen using picks for cleaning.  Sometime, you may not need to observe them in high magnification and wanted to preserve their natural shape.  I came across a website (forgot to bookmark it.  I lose the link and can’t seem to find it back.) which directly mounted the insects stored in alcohol.  The protocol used Xylene and Canada balsam.  I decided again using the less toxic alcohol and nail polish top coat.

Plastic_package

The first stop is to build a shallow well to create space so that the insects won’t be crushed by the slide and maintained the natural shape.  I found the electronic plastic package material will serve me well for this purpose.  The thickness is about 0.5mm.  It’s not too deep that I had to fill in lots of mountant but not too shallow to allow the cover slip to crush the insect.  It’s hard enough to maintain the shape but soft enough to cut with a pair of scissor.

hole_puncherThe first step was to cut a piece of plastic to the size slightly smaller than the slide but larger than the cover slip. The next is to make some holes with hole puncher – can be purchased from regular office supply store.  Apply some finger nail top coat on one side of the plastic.  Glue it to the slide and wait until it dried.  Pick up the insects from the preservation alcohol then transfers them to the well with a pair of tweezers.  Use the pick to adjust the body orientation and appendages to show their natural position.  Put a few drops of finger nail polish top coat in each well until it slightly over the top of the plastic.  Care should be taken to ensure that no bubble is introduced into the mountant.  Any bubble introduced into the mountant will be enlarged after the mountant dried out.aphid_under800

 

 

 

 

 

An aphid nymph was mounted upside down to show the under side of the insect.

aphid_top800

 

 

 

 

 

 

An aphid nymph top view

aphid_adult800

 

 

 

 

 

 

Wing adult aphid

This post, I presented an easy method for mounting insect onto microscope slide. The method is not appropriate for view the insect at high magnification for certain non-transparent body parts but it is appropriate for the viewing at low magnification with a stereo microscope using the top light.

6 comments:

  1. Your post is really good providing good information.. I liked it and enjoyed reading it. Keep sharing such important posts. Research Microscopes

    ReplyDelete
  2. This comment has been removed by the author.

    ReplyDelete
  3. thanks, For Your Post it is very Information
    MICROSCOPES

    ReplyDelete
  4. This is really amazing.....Microscope is a tool for us to see things that our naked eye is not capable of. The more it is clearer the more details we see. The usefulness has helped us to many breakthroughs in many fields. Thanks for sharing it with us :)

    ReplyDelete
  5. Great post with very useful information to all thanks for sharing with all of us. I like it very much. Visit: Microscope

    ReplyDelete
  6. 网址导航是一个集合较多网址,并按照一定条件进行分类的一种网址站。网址导航可谓是互联网最早的网站形式之一。把互联网上分散的资源融为有机整体,实现资源的全面共享和有机协作,使人们能够透明地使用资源的整体能力并按需获取信息。88152网址大全是一个简单实用的网址导航网站,也是专业的网站分类目录,免费收录国内外各行各业正规优质的网站。详情请浏览 http://www.88152.com 网址大全

    ReplyDelete